Thanks to the rich offer of profiles, the architects and designers designing enginners may realize even the most bold concepts as regards the aluminium-glass structures.
The system is intended for constructing and creating the light-weight curtain walls of hanging and filling type, as well as roofs, skylights and other structures.
The shape of mullions and transoms allows building aesthetic facades with visible narrow dividing lines, ensuring the structure durability and resistance at the same time. Additionally, the profiles have rounded external edges, what gives the so-called soft-line effect.
The large number of mullions and transoms available in this system guarantees the best possible aluminium use. The economic profiles were obtained by optimization of the intersection shape and by selecting the optimal wall thickness. At a very high load, all mullions may be additionally reinforced with typical internal aluminium profiles, increasing their resistance. The simple profile processing lowers the workload and eliminates all types of carvings at the side surfaces of the mullions.
Application of the thermal break made of insulating material HPVC and the glazing gaskets made of EPDM allows achieving the appropriate class of thermal insulation for the transparent part, according to DIN 4108 RMG 2.1 to 1. For the basic glazing, a value of the frame coefficient equals to UR=2.21[W/(m2*K)], what allows obtaining the satisfactory values of temperature at the internal surface of the mullion ~10 °C, and limits the effect of the water steam out-dropping on the aluminium elements.
Thanks to the sandwich structure of the lintel-window sill strip, in which the non-flammable materials such as mineral wool and plaster boards are used, the fire resistance classification was obtained depending on the construction of F0.25(EI15)NRO, F0.5(EI45)NRO.
For construction of the broken walls in horizontal and vertical section, the special overlay profiles as well as appropriately shaped clamping and cover beads are available, what eliminates the restrictions in shaping the building mass as well as the necessity to use special angular mullion. The accessories delivered with the system, aluminium supporting elements and connectors fixing the wall to the building surface are made of AlMgSi0.5F22 aluminium alloy.